“Delicate & Knits” toggles things, and “Permanent Press” Increment things. The way that this works is that Maytag machine code on the left is what you are programming, and the number on the right is the value for that parameter. You should see a new display on the machine now. It’s a three-pin locking connector with two very short loopbacks. On the back of the control panel, there’s a connector labelled “AA1”. Once those are off, usually pushing up will loosen the entire control panel assembly. Unscrew them, and remove trim and display cover. You will need, usually, a T-25 security bit, easily obtainable in a set for a few bucks at most hardware stores At the top of the Maytag machine you’ll see four screws holding the control panel on. Maytag Washers and dryers are essentially the same, card operated and coin-op are identical in their hardware and programming. The identifying features are green vacuum florescent display with a four-digit numerical display and six rectangular black buttons.
So almost all Maytag with digital control panel is exploitable in this way. It dates back to the 80s and is still produced. Summary: Most _ Maytag _ commercial washers and dryers out there use a common controller platform.
Average star voting: 4 ⭐ ( 73461 reviews)
